Follow

How do I configure a motion detection area with CLVR? 

You can add one or multiple motion detection area via the installable or online Java application. You can choose from a square and/or irregular (polygon) motion detection area.

1. Go to ‘Settings’;
2. Click on ‘Cameras’ in the upper right corner;
3. Select the Panasonic K-EP104LW;
4. Go to ‘Detection settings’;

Follow the steps as shown below to draw a square-shaped motion detection area:

1. Click on the ‘Square’ icon on the left side of the preview screen;
2  While keeping the mouse button down, draw the desired motion detection area in the preview screen;
3. Click on ‘Save’.

Follow the steps as shown below to draw a irregular-shaped (polygon) motion detection area (CLVR):  

1. Click on the ‘Polygon’ icon on the left side of the preview screen;
2. Click in the preview screen with your left mouse button on the starting point of the desired irregular-shaped motion detection area and draw a line to the first corner;
3. Release the left mouse button;
4. Press the left mouse button again and draw a second line to the second corner of the desired irregular-shaped motion detection area;
5. Release the left mouse button;
6. Repeat above steps until you have set the desired irregular-shaped motion detection area
7. Click on ‘Save’.  

Figure 1: a square-shaped and irregular-shaped motion detection area

To set when the Cameramanager Cloud Camera should detect motion, follow the steps at question 
 ‘How do I schedule recordings with motion detection (CLVR)?’. 

Have more questions? Submit a request

Comments

Powered by Zendesk