Follow

How can I add a camera to a Wi-Fi network?

The following steps only work after you have connected the camera via a wired connection. When you haven’t connected the camera via a wired connection, go to the question ‘How do I add a camera to the Cameramanager application?’.


1. Go to ‘Settings’ in the application and select the camera from the list on the left side;
2.  Click on ‘Wireless settings’. Some fields will be prefilled. Modify the fields by typing in the name of the Wi-Fi network (SSID), the communication mode, the type of encryption (WEP, WPA, WPA2, etc.) and the password. Click 'Save'.

4. Remove the Ethernet cable when the application indicates that you should do so. The camera now switches automatically to the connection via the Wi-Fi network.

Note: if the SSID or password is entered incorrectly, the camera light will not turn green, one minute after removal of the LAN / Ethernet cable. When this happens, disconnect the camera from the power supply. Reconnect the camera with the LAN / Ethernet cable and power supply and fill in the details for WiFi again.

Have more questions? Submit a request

Comments

Powered by Zendesk