In the local exceptions settings, you can create a list of IP addresses. Each IP address in this list will then be forced to use the local connection, like it would do if the device with which you connect to the camera and the camera itself would be physically on the same network. This is really a power user setting and should only be changed if you know what you're doing, since you can easily break your camera connection with it. Normally this local exceptions are not required, but for people using a virtual private network (VPN) it might turn out to be useful. If you have any questions about any technical details, please don't hesitate to contact our support department (more info on support can be found on the website).
Have more questions? Submit a request